Wedding Pair Cup Set

Two matching cups sold as a pair, each marked separately. Finished with a hand-applied metallic lustre band at the rim.

DKK 320

per piece, incl. 25% Danish moms

· engraving from +DKK 75

Food contact article · Hollow article

Glaze type: Lead-free and cadmium-free matte stoneware glaze, fired to 1260 °C
Declaration of conformity: DoC-MKC-2026-051Held on file. Email us and we send you the document for this piece.
Lead migration limit (Pb): ≤ 4.0 mg/L
Cadmium migration limit (Cd): ≤ 0.3 mg/L

Classified as a hollow article under Directive 84/500/EEC because it is fillable to a depth of more than 25 mm. Framework requirements follow EU Regulation 1935/2004. How we handle materials and safety.

Never microwave this piece. This piece carries a metallic lustre finish. Metal in a microwave will arc. Never put it in one.

What it will take

Microwave: No
Dishwasher: No
Oven: No

Avoid sudden temperature change. Do not pour boiling water into a cold piece, do not move a piece from a hot oven onto a cold surface, and do not put a hot piece under cold water. Sudden change can crack ceramic.

The lustre band contains metal. This piece must not be used in a microwave under any circumstance.
Hand wash only. The lustre band will not survive repeated dishwasher cycles.
The lustre band is applied and fired in a third, lower-temperature firing, which is why this set takes two kiln cycles before marking.

Specification

Capacity: 250 ml
Outer dimensions: 2 × Ø 74 × H 88 mm
Weight: 340 g
Engravable area: 760 mm²
Glazes offered: Chalk · Oat · Sand · Stone · Charcoal
Kiln cycles before marking: 2
Dimensional tolerance: ±5%

Engraving on this blank

Under-glaze
+DKK 95
The most durable of the three. The mark sits under the glaze, so dishwasher cycles wear the glaze, not the mark. At 5 mm glyph height this panel holds about 12 characters on one line.
Laser etch
Not offered on this blank
This set is finished with a hand-applied lustre band at the rim. Cutting through it would expose the metallic layer, so we do not laser etch this blank.
On-glaze decal
+DKK 75
The least durable of the three. It is a surface treatment: with repeated dishwasher use it will gradually wear and lose density. Hand washing extends its life considerably. At 5 mm glyph height this panel holds about 12 characters on one line.

How it is made

Thrown by hand on the wheel, so no two are identical.

Dimensions and glaze colour vary by up to ±5% between pieces. Pinholing, speckle and slight colour movement are how a fired glaze behaves — they are characteristics of the material, not faults.

Where it is made

Designed in: Glostrup, Denmark
Made in: Thrown and finished by hand in our Glostrup workshop, Denmark

Price by quantity · with On-glaze decal

Pieces	Per piece	Order total
1–5	DKK 395	DKK 395 at 1
6–11	DKK 368	DKK 2.208 at 6
12–23	DKK 343	DKK 4.116 at 12
24–47	DKK 320	DKK 7.680 at 24
48+	DKK 296	DKK 14.208 at 48

If you ordered today with On-glaze decal

Kiln loads: 18 August 2026
Out of the kiln: 27 August 2026
Estimated dispatch: 31 August 2026

Under-glaze and on-glaze decal each add a full kiln cycle to these dates. The configurator recalculates as you choose.

Delivery, breakage and returns

Packed for fragile transit and shipped from Glostrup. Delivery cost and estimated transit time are shown in full before you confirm. If a piece arrives broken, photograph the parcel and the piece and email us within 7 days — we remake or refund it.

Delivery & returns Two-year right to complain Materials & safety

Configure this blank