Skip to content

Next kiln loads Tue 18 Aug

Fired and shipped from Glostrup

Memory Tile 10×10, unmarked, on a workshop surface

Engravable panel

6400 mm²

The usable area inside the safety margin, not the whole surface.

Methods offered

3 of 3

Where one is not offered, the reason is printed below.

Keepsake

Memory Tile 10×10

A flat square tile — the most open surface we make, and the only blank in the range that is not intended to touch food.

DKK 125

per piece, incl. 25% Danish moms

· engraving from +DKK 55

Not a food contact article

This piece is supplied as a decorative object. It is not intended for contact with food or drink, it is not supplied as a food contact article under EU Regulation 1935/2004, and it should not be used to serve from.

Glaze
Matte decorative stoneware glaze, fired to 1260 °C
Microwave · dishwasher · oven
None of the three.

What it will take

Microwave
No
Dishwasher
No
Oven
No

Avoid sudden temperature change. Do not pour boiling water into a cold piece, do not move a piece from a hot oven onto a cold surface, and do not put a hot piece under cold water. Sudden change can crack ceramic.

  • Decorative only. This tile is not intended for contact with food or drink and is not supplied as a food contact article.
  • Not for use in a microwave, dishwasher or oven.

Specification

Outer dimensions
100 × 100 × 9 mm
Weight
180 g
Engravable area
6400 mm²
Glazes offered
Chalk · Stone · Charcoal
Kiln cycles before marking
1
Dimensional tolerance
±5%

Engraving on this blank

  • Under-glaze

    +DKK 95

    The most durable of the three. The mark sits under the glaze, so dishwasher cycles wear the glaze, not the mark. At 5 mm glyph height this panel holds about 38 characters on one line.

  • Laser etch

    +DKK 55

    Durable — the mark is a physical groove, not a coating. The glaze is broken where it is cut, so the recess feels rougher than the surrounding surface and can hold traces of coffee or tea over time. At 5 mm glyph height this panel holds about 38 characters on one line.

  • On-glaze decal

    +DKK 75

    The least durable of the three. It is a surface treatment: with repeated dishwasher use it will gradually wear and lose density. Hand washing extends its life considerably. At 5 mm glyph height this panel holds about 38 characters on one line.

How it is made

Pressed from a mould to a repeatable profile, then glazed, marked and fired by hand.

Dimensions and glaze colour vary by up to ±5% between pieces. Pinholing, speckle and slight colour movement are how a fired glaze behaves — they are characteristics of the material, not faults.

Where it is made

Designed in
Glostrup, Denmark
Made in
Blank pressed by our EU porcelain partner; glazed, marked and fired in our Glostrup workshop, Denmark

Price by quantity · with Laser etch

PiecesPer pieceOrder total
1–5DKK 180DKK 180 at 1
6–11DKK 167DKK 1.002 at 6
12–23DKK 157DKK 1.884 at 12
24–47DKK 146DKK 3.504 at 24
48+DKK 135DKK 6.480 at 48

If you ordered today with Laser etch

Kiln loads
18 August 2026
Out of the kiln
24 August 2026
Estimated dispatch
31 August 2026

Under-glaze and on-glaze decal each add a full kiln cycle to these dates. The configurator recalculates as you choose.

Delivery, breakage and returns

Packed for fragile transit and shipped from Glostrup. Delivery cost and estimated transit time are shown in full before you confirm. If a piece arrives broken, photograph the parcel and the piece and email us within 7 days — we remake or refund it.

Delivery & returnsTwo-year right to complainMaterials & safety

Configure this blank

Also in Keepsake