Engravable panel
900 mm²
The usable area inside the safety margin, not the whole surface.
Methods offered
3 of 3
Where one is not offered, the reason is printed below.
Plates & Bowls
Side Plate Ø16
A shallow plate for bread or a pastry. Marks sit either in the well or around the rim.
DKK 95
per piece, incl. 25% Danish moms
· engraving from +DKK 55
Food contact article · Flat article
- Glaze type
- Lead-free and cadmium-free transparent stoneware glaze, fired to 1260 °C
- Declaration of conformity
- DoC-MKC-2026-021Held on file. Email us and we send you the document for this piece.
- Lead migration limit (Pb)
- ≤ 0.8 mg/dm²
- Cadmium migration limit (Cd)
- ≤ 0.07 mg/dm²
Classified as a flat article under Directive 84/500/EEC because it is not fillable, or fillable to a depth of 25 mm or less. Framework requirements follow EU Regulation 1935/2004. How we handle materials and safety.
What it will take
- Microwave
- Yes
- Dishwasher
- Yes
- Oven
- No
Avoid sudden temperature change. Do not pour boiling water into a cold piece, do not move a piece from a hot oven onto a cold surface, and do not put a hot piece under cold water. Sudden change can crack ceramic.
Specification
- Outer dimensions
- Ø 160 × H 16 mm
- Weight
- 210 g
- Engravable area
- 900 mm²
- Glazes offered
- Chalk · Oat · Sand · Stone · Charcoal
- Kiln cycles before marking
- 1
- Dimensional tolerance
- ±5%
Engraving on this blank
Under-glaze
+DKK 95
The most durable of the three. The mark sits under the glaze, so dishwasher cycles wear the glaze, not the mark. At 5 mm glyph height this panel holds about 13 characters on one line.
Laser etch
+DKK 55
Durable — the mark is a physical groove, not a coating. The glaze is broken where it is cut, so the recess feels rougher than the surrounding surface and can hold traces of coffee or tea over time. At 5 mm glyph height this panel holds about 13 characters on one line.
On-glaze decal
+DKK 75
The least durable of the three. It is a surface treatment: with repeated dishwasher use it will gradually wear and lose density. Hand washing extends its life considerably. At 5 mm glyph height this panel holds about 13 characters on one line.
How it is made
Thrown by hand on the wheel, so no two are identical.
Dimensions and glaze colour vary by up to ±5% between pieces. Pinholing, speckle and slight colour movement are how a fired glaze behaves — they are characteristics of the material, not faults.
Where it is made
- Designed in
- Glostrup, Denmark
- Made in
- Thrown and finished by hand in our Glostrup workshop, Denmark
Price by quantity · with Laser etch
| Pieces | Per piece | Order total |
|---|---|---|
| 1–5 | DKK 150 | DKK 150 at 1 |
| 6–11 | DKK 139 | DKK 834 at 6 |
| 12–23 | DKK 131 | DKK 1.572 at 12 |
| 24–47 | DKK 122 | DKK 2.928 at 24 |
| 48+ | DKK 112 | DKK 5.376 at 48 |
If you ordered today with Laser etch
- Kiln loads
- 18 August 2026
- Out of the kiln
- 24 August 2026
- Estimated dispatch
- 31 August 2026
Under-glaze and on-glaze decal each add a full kiln cycle to these dates. The configurator recalculates as you choose.
Delivery, breakage and returns
Packed for fragile transit and shipped from Glostrup. Delivery cost and estimated transit time are shown in full before you confirm. If a piece arrives broken, photograph the parcel and the piece and email us within 7 days — we remake or refund it.
Delivery & returnsTwo-year right to complainMaterials & safety
Also in Plates & Bowls
Dinner Plate Ø26
- Engravable area
- 2400 mm² panel
- Methods offered
- 3 of 3 methods
DKK 165incl. moms
Pasta Plate Ø24 deep
- Capacity
- 600 ml
- Engravable area
- 1800 mm² panel
- Methods offered
- 3 of 3 methods
DKK 175incl. moms
Cereal Bowl Ø15
- Capacity
- 450 ml
- Engravable area
- 780 mm² panel
- Methods offered
- 3 of 3 methods
DKK 125incl. moms
Soup Bowl Ø18
- Capacity
- 600 ml
- Engravable area
- 900 mm² panel
- Methods offered
- 3 of 3 methods
DKK 145incl. moms