Engravable panel
3200 mm²
The usable area inside the safety margin, not the whole surface.
Methods offered
3 of 3
Where one is not offered, the reason is printed below.
Serveware
Oval Platter 32×20
The largest flat surface in the range at 3200 mm² of usable panel. Long lines fit without wrapping.
DKK 385
per piece, incl. 25% Danish moms
· engraving from +DKK 55
Food contact article · Flat article
- Glaze type
- Lead-free and cadmium-free transparent stoneware glaze, fired to 1260 °C
- Declaration of conformity
- DoC-MKC-2026-032Held on file. Email us and we send you the document for this piece.
- Lead migration limit (Pb)
- ≤ 0.8 mg/dm²
- Cadmium migration limit (Cd)
- ≤ 0.07 mg/dm²
Classified as a flat article under Directive 84/500/EEC because it is not fillable, or fillable to a depth of 25 mm or less. Framework requirements follow EU Regulation 1935/2004. How we handle materials and safety.
What it will take
- Microwave
- Yes
- Dishwasher
- Yes
- Oven
- No
Avoid sudden temperature change. Do not pour boiling water into a cold piece, do not move a piece from a hot oven onto a cold surface, and do not put a hot piece under cold water. Sudden change can crack ceramic.
- Largest flat panel we offer.
Specification
- Outer dimensions
- 320 × 200 × H 28 mm
- Weight
- 980 g
- Engravable area
- 3200 mm²
- Glazes offered
- Chalk · Oat · Sand · Stone · Charcoal
- Kiln cycles before marking
- 1
- Dimensional tolerance
- ±5%
Engraving on this blank
Under-glaze
+DKK 95
The most durable of the three. The mark sits under the glaze, so dishwasher cycles wear the glaze, not the mark. At 5 mm glyph height this panel holds about 26 characters on one line.
Laser etch
+DKK 55
Durable — the mark is a physical groove, not a coating. The glaze is broken where it is cut, so the recess feels rougher than the surrounding surface and can hold traces of coffee or tea over time. At 5 mm glyph height this panel holds about 26 characters on one line.
On-glaze decal
+DKK 75
The least durable of the three. It is a surface treatment: with repeated dishwasher use it will gradually wear and lose density. Hand washing extends its life considerably. At 5 mm glyph height this panel holds about 26 characters on one line.
How it is made
Thrown by hand on the wheel, so no two are identical.
Dimensions and glaze colour vary by up to ±5% between pieces. Pinholing, speckle and slight colour movement are how a fired glaze behaves — they are characteristics of the material, not faults.
Where it is made
- Designed in
- Glostrup, Denmark
- Made in
- Thrown and finished by hand in our Glostrup workshop, Denmark
Price by quantity · with Laser etch
| Pieces | Per piece | Order total |
|---|---|---|
| 1–5 | DKK 440 | DKK 440 at 1 |
| 6–11 | DKK 409 | DKK 2.454 at 6 |
| 12–23 | DKK 383 | DKK 4.596 at 12 |
| 24–47 | DKK 357 | DKK 8.568 at 24 |
| 48+ | DKK 330 | DKK 15.840 at 48 |
If you ordered today with Laser etch
- Kiln loads
- 18 August 2026
- Out of the kiln
- 24 August 2026
- Estimated dispatch
- 31 August 2026
Under-glaze and on-glaze decal each add a full kiln cycle to these dates. The configurator recalculates as you choose.
Delivery, breakage and returns
Packed for fragile transit and shipped from Glostrup. Delivery cost and estimated transit time are shown in full before you confirm. If a piece arrives broken, photograph the parcel and the piece and email us within 7 days — we remake or refund it.
Delivery & returnsTwo-year right to complainMaterials & safety
Also in Serveware
Serving Bowl Ø26
- Capacity
- 2600 ml
- Engravable area
- 2200 mm² panel
- Methods offered
- 3 of 3 methods
DKK 345incl. moms
Cake Stand Ø28
- Engravable area
- 2600 mm² panel
- Methods offered
- 3 of 3 methods
DKK 425incl. moms
Milk Jug 200 ml
- Capacity
- 200 ml
- Engravable area
- 640 mm² panel
- Methods offered
- 3 of 3 methods
DKK 165incl. moms
Sugar Pot with Lid 150 ml
- Capacity
- 150 ml
- Engravable area
- 580 mm² panel
- Methods offered
- 3 of 3 methods
DKK 185incl. moms