Espresso Cup 80 ml

The smallest blank we mark. Tapered walls and a tight loop handle; the usable panel sits below the rim on the outer flank.

DKK 85

per piece, incl. 25% Danish moms

· engraving from +DKK 55

Food contact article · Hollow article

Glaze type: Lead-free and cadmium-free transparent stoneware glaze, fired to 1260 °C
Declaration of conformity: DoC-MKC-2026-011Held on file. Email us and we send you the document for this piece.
Lead migration limit (Pb): ≤ 4.0 mg/L
Cadmium migration limit (Cd): ≤ 0.3 mg/L

Classified as a hollow article under Directive 84/500/EEC because it is fillable to a depth of more than 25 mm. Framework requirements follow EU Regulation 1935/2004. How we handle materials and safety.

What it will take

Microwave: Yes
Dishwasher: Yes
Oven: No

Avoid sudden temperature change. Do not pour boiling water into a cold piece, do not move a piece from a hot oven onto a cold surface, and do not put a hot piece under cold water. Sudden change can crack ceramic.

Specification

Capacity: 80 ml
Outer dimensions: Ø 60 × H 55 mm
Weight: 95 g
Engravable area: 400 mm²
Glazes offered: Chalk · Oat · Sand · Stone · Charcoal
Kiln cycles before marking: 1
Dimensional tolerance: ±5%

Engraving on this blank

Under-glaze
+DKK 95
The most durable of the three. The mark sits under the glaze, so dishwasher cycles wear the glaze, not the mark. At 5 mm glyph height this panel holds about 8 characters on one line.
Laser etch
+DKK 55
Durable — the mark is a physical groove, not a coating. The glaze is broken where it is cut, so the recess feels rougher than the surrounding surface and can hold traces of coffee or tea over time. At 5 mm glyph height this panel holds about 8 characters on one line.
On-glaze decal
+DKK 75
The least durable of the three. It is a surface treatment: with repeated dishwasher use it will gradually wear and lose density. Hand washing extends its life considerably. At 5 mm glyph height this panel holds about 8 characters on one line.

How it is made

Thrown by hand on the wheel, so no two are identical.

Dimensions and glaze colour vary by up to ±5% between pieces. Pinholing, speckle and slight colour movement are how a fired glaze behaves — they are characteristics of the material, not faults.

Where it is made

Designed in: Glostrup, Denmark
Made in: Thrown and finished by hand in our Glostrup workshop, Denmark

Price by quantity · with Laser etch

Pieces	Per piece	Order total
1–5	DKK 140	DKK 140 at 1
6–11	DKK 130	DKK 780 at 6
12–23	DKK 122	DKK 1.464 at 12
24–47	DKK 114	DKK 2.736 at 24
48+	DKK 105	DKK 5.040 at 48

If you ordered today with Laser etch

Kiln loads: 18 August 2026
Out of the kiln: 24 August 2026
Estimated dispatch: 31 August 2026

Under-glaze and on-glaze decal each add a full kiln cycle to these dates. The configurator recalculates as you choose.

Delivery, breakage and returns

Packed for fragile transit and shipped from Glostrup. Delivery cost and estimated transit time are shown in full before you confirm. If a piece arrives broken, photograph the parcel and the piece and email us within 7 days — we remake or refund it.

Delivery & returns Two-year right to complain Materials & safety

Configure this blank