Engravable panel
380 mm²
The usable area inside the safety margin, not the whole surface.
Methods offered
1 of 3
Where one is not offered, the reason is printed below.
Café Line
Takeaway-Match Ceramic Lid
A ceramic lid with a sipping opening, sized to the 300 ml café mug. Sold separately.
DKK 65
per piece, incl. 25% Danish moms
· engraving from +DKK 55
Food contact article · Flat article
- Glaze type
- Lead-free and cadmium-free transparent stoneware glaze, fired to 1260 °C
- Declaration of conformity
- DoC-MKC-2026-047Held on file. Email us and we send you the document for this piece.
- Lead migration limit (Pb)
- ≤ 0.8 mg/dm²
- Cadmium migration limit (Cd)
- ≤ 0.07 mg/dm²
Classified as a flat article under Directive 84/500/EEC because it is not fillable, or fillable to a depth of 25 mm or less. Framework requirements follow EU Regulation 1935/2004. How we handle materials and safety.
What it will take
- Microwave
- Yes
- Dishwasher
- Yes
- Oven
- No
Avoid sudden temperature change. Do not pour boiling water into a cold piece, do not move a piece from a hot oven onto a cold surface, and do not put a hot piece under cold water. Sudden change can crack ceramic.
- Fits the Café Mug Heavy-Base 300 ml. It does not fit the other cups in the range.
- Not a sealed lid. It reduces heat loss and splash; it will not hold liquid in if the cup is tipped.
Specification
- Outer dimensions
- Ø 86 × H 22 mm
- Weight
- 95 g
- Engravable area
- 380 mm²
- Glazes offered
- Chalk · Oat · Stone
- Kiln cycles before marking
- 1
- Dimensional tolerance
- ±5%
Engraving on this blank
Under-glaze
Not offered on this blank
The usable panel on this blank is below the area an under-glaze mark needs at its 3 mm minimum glyph height.
Laser etch
+DKK 55
Durable — the mark is a physical groove, not a coating. The glaze is broken where it is cut, so the recess feels rougher than the surrounding surface and can hold traces of coffee or tea over time. At 5 mm glyph height this panel holds about 8 characters on one line.
On-glaze decal
Not offered on this blank
This blank is marked on a surface that meets food directly, and an on-glaze film is not suited to that contact.
How it is made
Pressed from a mould to a repeatable profile, then glazed, marked and fired by hand.
Dimensions and glaze colour vary by up to ±5% between pieces. Pinholing, speckle and slight colour movement are how a fired glaze behaves — they are characteristics of the material, not faults.
Where it is made
- Designed in
- Glostrup, Denmark
- Made in
- Blank pressed by our EU porcelain partner; glazed, marked and fired in our Glostrup workshop, Denmark
Price by quantity · with Laser etch
| Pieces | Per piece | Order total |
|---|---|---|
| 1–5 | DKK 120 | DKK 120 at 1 |
| 6–11 | DKK 111 | DKK 666 at 6 |
| 12–23 | DKK 105 | DKK 1.260 at 12 |
| 24–47 | DKK 98 | DKK 2.352 at 24 |
| 48+ | DKK 90 | DKK 4.320 at 48 |
If you ordered today with Laser etch
- Kiln loads
- 18 August 2026
- Out of the kiln
- 24 August 2026
- Estimated dispatch
- 31 August 2026
Under-glaze and on-glaze decal each add a full kiln cycle to these dates. The configurator recalculates as you choose.
Delivery, breakage and returns
Packed for fragile transit and shipped from Glostrup. Delivery cost and estimated transit time are shown in full before you confirm. If a piece arrives broken, photograph the parcel and the piece and email us within 7 days — we remake or refund it.
Delivery & returnsTwo-year right to complainMaterials & safety
Also in Café Line
Café Stacking Cup 160 ml
- Capacity
- 160 ml
- Engravable area
- 520 mm² panel
- Methods offered
- 2 of 3 methods
DKK 95incl. moms
Café Stacking Saucer Ø14
- Engravable area
- 620 mm² panel
- Methods offered
- 2 of 3 methods
DKK 75incl. moms
Café Flat White Cup 200 ml
- Capacity
- 200 ml
- Engravable area
- 660 mm² panel
- Methods offered
- 3 of 3 methods
DKK 115incl. moms
Café Mug Heavy-Base 300 ml
- Capacity
- 300 ml
- Engravable area
- 980 mm² panel
- Methods offered
- 3 of 3 methods
DKK 135incl. moms